Skip to content
Digital patterns — direct download after payment
Secure payment
Fab For You
Favorites

Sewing Tutorials

How to Adjust Pants Length for Growing Kids

Walden front and back paper pattern pieces side by side with blue horizontal length-adjustment lines.

Guest method by Lianne Herregraven.

Adding every extra centimetre at the hem did not give Lianne the result she wanted for her children’s long legs. For this Walden project, she lengthened the leg above and below the knee, then restored the colourblock joins. Her original process photographs show how she worked on her traced paper pieces.

1. Choose the base size and plan the extra length

Start from the hip size specified by your pattern, then compare the wearer’s inseam with that size’s length. Check the intended hem or cuff finish as well. Lianne’s example needed approximately 14 cm of extra leg length, which she divided into two 7 cm additions. That distribution suited her wearer; use your own measurements and knee position to decide where a change belongs.

2. Temporarily join the front colourblock pieces

Trace the pieces before altering them. To treat the divided front as one leg, align the joining sewing lines. In Lianne’s Walden example, both adjoining pieces include a 1 cm seam allowance, so the cutting edges overlap by 2 cm when those sewing lines meet. Do not butt the cutting edges together or overlap by only 1 cm. Check the allowance in the pattern version you are using.

Ruler placed diagonally across overlapping Walden paper colourblock sections at a seam join.
Check the overlap at the existing colourblock join before treating the front sections as one leg. Process photo: Lianne Herregraven. Pattern: Walden.

3. Mark matching adjustment levels

Place the front and back together to mark the changes at corresponding heights. Draw a line above the knee and another below it, at right angles to the grainline. Consider where the upper cut crosses the colourblocks: its position affects which section becomes longer.

Walden front and back paper pattern pieces side by side with blue horizontal length-adjustment lines.
Blue lines mark the planned length-adjustment levels on the front and back. Process photo: Lianne Herregraven. Pattern: Walden.

4. Cut and spread on squared paper

Cut along the marked lines and place paper beneath the gaps. Keep the grainline aligned across the sections rather than shifting one piece sideways. Lianne used squared paper to measure the additions accurately. Her two 7 cm gaps are an example, not an amount to copy for every child.

A cut Walden paper leg section spread apart on blue squared paper to add length.
Squared paper supports a measured gap between two cut leg sections. Process photo: Lianne Herregraven. Pattern: Walden.

5. Redraw the outside edges

Secure the paper and draw smooth transitions along the side seam and inseam. Check the new front and back lengths against the seams that will be joined. Retain the intended leg shape and knee position instead of extending the outline with an abrupt corner.

Blue lines redraw the outside edge of a Walden paper leg after adding a squared-paper insert.
The blue outline connects the original leg sections across the paper insert. Process photo: Lianne Herregraven. Pattern: Walden.

6. Restore the colourblock seamlines

On the lengthened front, redraw the colourblock joins. Lianne uses the middle of the original overlapped allowances as the sewing-line reference. Check the shape and position of each section before separating the paper again.

Blue diagonal colourblock seamlines drawn across a lengthened Walden front-leg paper pattern.
New blue diagonal lines establish the colourblock joins on the lengthened front. Process photo: Lianne Herregraven. Pattern: Walden.

7. Add allowance to the new joining edges

Cut the front apart along the new colourblock seamlines. Those new edges need seam allowance before fabric is cut. In this example that is 1 cm at each new joining edge. Add it to the tracing, or clearly mark the pieces so it is added during cutting. The outer edges that already retain their allowance do not need another allowance added automatically.

Separated Walden front-leg colourblock paper pieces with handwritten blue seam-allowance reminders.
Handwritten reminders identify the allowance needed at the newly separated colourblock joins. Process photo: Lianne Herregraven. Pattern: Walden.

Check pockets and fit before sewing the final pair

Lianne did not lengthen the upper front pocket section in this example. If your alteration changes a pocket edge, adjust the matching pocket bag, facing or band as needed. Keep the original pieces for comparison and label the altered size, added length and allowances.

Her wearer needed extra leg length, so she left the rise unchanged. A rise alteration is a separate decision. Make a fitting sample when the change is substantial, and check sitting, bending, knee position and finished length before using your chosen fabric.

Use the complete Walden instructions for garment assembly. Prepare with our body measurement guide and stretch and recovery guide. These process photographs illustrate an alteration on a traced pattern; use your own correctly printed pattern for cutting.

Related stories